Rhino Panel Equipment is a division of Thatcher Engineering Pty Ltd
Rhino
Rhino Panel Equipment

We have a wide range of Edge Bander solutions, download PDF of the selected model for further information or contact RHINO

RHINO distributes to all States and have technicians in East Coast States and WA for installation and service.



R4000 Compact SII  Edge Bander
The RHINO R4000 Compact (SII) Edger incorporates the following features; Pre-heated infeed fence, Electric Rise and fall of beam height, Teflon coated hot melt glue pot, 2 motor end saw unit, top and bottom trimming, top and bottom radius scrapers, buffing, dust extraction on cut off saws, trimmers & scrapers, all collected to one common 150mm dia. outlet, built in dust extraction electrics for upto 4kW dust unit to start with feed track, DELTA touch screen controller, New streamlined design insulated hood with cabin light, Temperature stand by, safety feed gate, 12mt/min Feed speed, improved tape reel holder with edge guides.  All new RHINO Edgers include 12 month warranty and runs on 20 Amp 3 phase 5 wire electric circuit.




Main Technical Details:
  • Tape thickness: 0.4-2mm

  •  Work piece thickness: 12-45mm

  •  work piece width: 80mm

  •  work piece length: 150mm

  •  Feeding speed: 12mt/min.

  •  End cutting motors: 2 x 0.5kW 12,000rpm

  •  Edge trimming motors 2 x 0.5kW 12,000rpm

  •  NEW Features of SII Electric Rise/Fall of Beam, Hood Lighting + Preheated Infeed Fence


Click here to download the pdf




RD 2000 Portable Edge Bander


Main Technical Details:

  • Hot Melt
  • Hand Held
  • Contour and straight edging
  • 240V Single Phase
  • Hand held end trimmer
  • Hand held top and bottom trimmer
  • Supportable clamps



R-105 MANUAL HOT MELT EDGE BANDER
The R-105 Manual Edge Banding Machine can glue and guillotine the edge in one pass.

Click here to download the pdf


Main Technical Details:
  • Working Table Size: 1000 x 725mm
  • Thickness for workpiece: 1000 x 560mm
  • Angle for tilting working table 60/40 degree
  • Thickness for edge banding : 0.3 - 3mm
  • Min. Radius of Curved Eding: 20mm
  • Weight : 320 Kg
  • Heating Power: 2.4kW
  • Machine dimensions : 160 x 97 x 115 cm



R4000 RC (Rapid Change) Edge Bander
The NEW SERIES RHINO R4000 (RC) RAPID CHANGE Edge Bander is a large heavy duty machine with 20mt/min. feed speed, it incorporates ITALIAN Motors, Taiwanese DELTA Inverters, Teflon coated hot melt glue pot, infrared board pre-heating system, temperature standby, electric rise/fall of beam height, insulated hood with florescent lighting, built in electrics for connection of dust extractor, linear guide rail for end cutting function, end cutting unit with adjustable angle and fine trimming adjustable unit 0 - 15 degrees, top and bottom flat glue scrapers and buffers!  All features controlled by the DELTA touch screen controller.


Click here to download the pdf
Main Technical Details:
  • Tape width: 15-58mm
  • Tape thickness: 0.4-2mm
  • Work piece thickness: 12-55mm
  • Min. work piece width: 80mm
  • Min. work piece length: 120mm
  • Feeding speed: 12-20mt/min.
  • Cutting motors: 0.5kw 12,000rpm
  • trimming  motors: 0.5kw 12,000rpm
  • Packaging size: 4600 x 1000 x 1700mm
  • Weight 1200kg



R5000 RC (Rapid Change) Edge Bander
The RHINO R5000 RC Fully Featured Edge Bander features a heavy duty construction, heat treated prior to machining, dual tape holder, temperature controlled infeed fence and temperature stand by if not used for a predetermined period of time. Linear guide rail for end cutting function, end cutting unit with adjustable angle and fine trimming adjustable unit 0 - 15 degrees. The edge bander features italian motors and DELTA 3 phase inverters for more power and braking with touch screen for all controls, top and bottom flat glue scrapers and buffers, white oil spray for PVC to enhance finish, sound proofed hood with large viewing window and dust extraction on electrics, controls, scrapers and trimmers.


Click here to download the pdf





Main Technical Details:
  • Tape width: 15-58mm
  • Tape thickness: 0.4-2mm
  • Work piece thickness: 12-55mm
  • Min. work piece width: 80mm
  • Min. work piece length: 120mm
  • Feeding speed: 12-20mt/min.
  • Cutting motors: 0.5kw 12,000rpm
  • trimming motors: 0.5kw 12,000rpm
  • Packaging size: 5700 x 1000 x 1700mm
  • Weight 2100kg



R8000 RC (Rapid Change) Edge Bander
The R8000 RC Edger incorporates all features as per the R5000 RC, however it also includes PRE-MILLING and a 2nd TRIMMING UNIT for rough trimming.


Click here to download the pdf
Main Technical Details:
  • Tape width: 15-58mm
  • Tape thickness: 0.4-2mm
  • Work piece thickness: 12-55mm
  • Min. work piece width: 80mm
  • Min. work piece length: 120mm
  • Feeding speed: 12-20mt/min.
  • Cutting motors: 0.5kw 12,000rpm
  • Trimming motors: 0.5kw 12,000rpm



Rhino App

Get our FREE Mobile App

 
with current equipment listings and prices.


Text “RHI” to
0418 479 500

NEWSLETTERS & SPECIAL SALES

Sign up to our newsletter and stay up to date



Joomla Extensions powered by Joobi

© 2017 Rhino Panel Equipment | Rhino Panel Equipment is a division of Thatcher Engineering

Edge Banders, Panel Saws, Hot & Cold Presses, Band Saws, Timber Laminating Presses, Drill Presses, Dust Extraction, Sanders, Glue Spreaders and all machinery for the flat panel timber industry